Skip to content
6CCVD Research

Time-domain Analysis Based on the Electromechanical Impedance Method for Monitoring of the Dressing Operation

At a Glance

Section titled “At a Glance”
MetadataDetails
Publication Date2018-01-01
JournalProcedia CIRP
AuthorsPedro Oliveira, FĂĄbio Isaac Ferreira, Paulo Roberto de Aguiar, Fabricio GuimarĂŁes Batista, Eduardo Carlos Bianchi
InstitutionsUniversidade Estadual Paulista (Unesp), University of Naples Federico II
Citations14

Abstract

Section titled “Abstract”

Among the methods used in structural health monitoring (SHM), the electromechanical impedance technique (EMI), which uses piezoelectric transducers of lead zirconate titanate (PZT), stands out for its low cost. Then, this paper presents a new approach for monitoring of the dressing operation from the digital processing of voltage signals based on the time-domain response of a PZT transducer by EMI method. Experimental tests of the dressing process were performed by using a single-point dresser equipped with a natural diamond. The voltage signals in the time-domain were collected in different damage levels. By using temporal statistics, it was possible to qualify different damage levels that the diamond suffered during the dressing operation, observing variations from the magnitude of the signals. The dressing operation is of utmost importance for the grinding process and the dresser wear negatively affects the result of the process, which owns high added value. In this way, this work contributes with a new monitoring tool which aims ensuring a consistent dressing operation.

Tech Support

Section titled “Tech Support”

Original Source

Section titled “Original Source”

References

Section titled “References”
  1. 2017 - Wear Monitoring of Single-Point Dresser in Dry Dressing Operation Based on Neural Models
  2. 2008 - Correlation of grinding wheel topography and grinding performance: A study from a viewpoint of three-dimensional surface characterisation [Crossref]
  3. 2009 - Monitoring the dressing operation in the grinding process
  4. 2014 - Tool Condition Monitoring of Single-Point Dresser Using Acoustic Emission and Neural Networks Models [Crossref]
  5. 2014 - An effective electromechanical impedance technique for steel structural health monitoring [Crossref]
  6. 2013 - Electromechanical impedance method. Advanced Structural Damage Detection: From Theory to Engineering Application
  7. 2016 - PZT based tunable Interdigital Transducer for Lamb waves based NDT and SHM [Crossref]
  8. 2009 - A new impedance measurement system for PZT based structural health monitoring
  9. 2015 - Piezoelectric Transducers Assessed by the Pencil Lead Break for Impedance-Based Structural Health Monitoring [Crossref]
  10. 2015 - Grinding process monitoring based on electromechanical impedance measurements [Crossref]

Reads Similar to This

Microstructures Manufactured in Diamond by Use of Laser Micromachining. A Vector-total Field Magnetometry and Calibration Using NV Center Ensembles Distributed piezoelectric transducers and their applications in structural health monitoring